Nordlaks is a Norwegian fully integrated company that produces, processes, and sells Atlantic salmon and rainbow trout worldwide. It has recently completed the building of a new smolt facility for fish up to 1 pound at Innhavet in Hamarøy municipality. This RAS (recirculating aquaculture system) fish farm is the biggest of its kind in Norway, with a special focus on smolt welfare. The land-based facility has state-of-the-art equipment for optimal biosecurity and sustainability. At the heart of the RAS process, all recirculation pumps were supplied by Sulzer.
PROJECT DATA
Fifty AHLSTAR and BE recirculation pumps (continuous duty) in water treatment loops. The dry-installed single-stage overhung pumps are equipped with semi-open impellers and single mechanical seals.
Five VUPX-0402 (602,312 gallons per hour at 10 feet of head) submersible propeller pumps (intermittent duty) for the emptying of fish tanks.
THE CHALLENGE
The Innhavet RAS plant has thirty-four fish tanks of different capacities (92,000 to 264,000 gallons) in five separate main sections. Each section is independent from the others and includes its own complete water treatment system in a semi-closed loop (98 percent recirculation plus 2 percent make-up water). The brackish water from the fish tanks first flows by gravity to a rotating drum filter for the removal of the main suspended solid particles. It then falls into an MBBR (moving bed biofilm reactor) for TAN (total ammonium nitrogen) reduction. After passing through a countercurrent degasser for the stripping of nitrogen and carbon dioxide, the treated water is finally pumped to some head tanks, prior to oxygenation and return to the fish tanks.
In each fish tank, the water is fully renewed every half an hour. The well-being of the smolts is highly dependent on a constant flow of water through the facility. The reliability of the recirculation pumps is, therefore, of paramount importance.
High overall energy performance of the RAS plant means a better environmental footprint and reduced operating costs. Consequently, the main components of the water treatment loops must have top-class efficiencies, particularly the recirculation pumps.
THE SOLUTION
As a long-term supplier of equipment (pumps and turbines) to other Nordlaks plants, Sulzer was involved at an early stage of the new project. In collaboration with the Momek Group, a large industrial service provider in Scandinavia, the pumps were carefully selected, not only to fulfil the requirements during the warranty period, but to run optimally and economically during the whole lifetime of the site. For the recirculation of the brackish water, fifty AHLSTAR and BE process pumps in duplex material have now been installed and are operating continuously. In addition, five VUPX submersible propeller pumps are used on intermittent duty when the fish tanks are emptied during the transfer of smolts.
CUSTOMER BENEFIT
By choosing to work with a trusted partner, the client made sure to get fast and permanent technical support, in addition to the best products. The recirculation pumps have the following major advantages:
Extremely high hydraulic efficiencies that by far exceed the strictest energy regulations for water pumps. This means huge energy savings over time and smaller total cost of ownership, duty points close to BEP (best efficiency points), low rotation speeds, and rigid baseplates grouted in concrete. The pump units are working smoothly with minimized vibration levels. Superior-grade material is used for all wetted parts. For the choice of pump material in contact with brackish water, the long-term perspective favored duplex stainless steel rather than 316SS. Duplex steels have better design strength than austenitic stainless steels, as well as higher corrosion, abrasion, and pitting resistance. In the end, maintenance costs and the risk of downtime are reduced.
Sulzer is a recognized supplier in the fish farm market, with innovative and proven pumping, mixing, and aeration solutions, and provides highly energy-efficient products with low life-cycle costs and the smallest possible environmental footprint. As a material specialist in a wide range of fresh water, brackish water, seawater, and brine applications, we can offer pumps in cast iron, 316 stainless steel, duplex, super duplex, SMO, etc. .
FOR MORE INFORMATION
For more information on Oerlikon Balzers and their family of DLC surface solutions, please visit https://www.oerlikon.com/balzers/us/en/portfolio/balzers-surface-solutions/.
